IBASE MI945 - Manual (Page 42)

BIOS SETUP
38 MI945 User’s Manual
Onboard Serial Port
These fields allow you to select the onboard serial ports and their
addresses. The default values for these ports are:
Serial Port 1 3F8/IRQ4
Serial Port 2 2F8/IRQ3
Serial Port 3 230/IRQ5
Serial Port 4 238/IRQ7
UART Mode Select
This field determines the UART 2 mode in your computer. The default
value is Normal.
PWRON After PWR-Fail
This field sets the system power status whether on or off when power
returns to the system from a power failure situation.
Phoenix - AwardBIOS CMOS Setup Utility
USB Device Setting
USB 1.0 Controller Enabled ITEM HELP
USB 2.0 Controller Enabled
USB Keyboard Function Enable
USB Mouse Function Disable Menu Level >
USB Storage Function Enabled
*** USB Mass Storage Device Boot
Setting ***
USB 1.0 Controller
The options for this field are Enabled and Disabled. By default, this field
is set to Enabled.
USB 2.0 Controller
The options for this field are Enabled and Disabled. By default, this field
is set to Enabled. In order to use USB 2.0, necessary OS drivers must be
installed first. Please update your system to Windows 2000 SP4 or
Windows XP SP2.
USB Keyboard/Mouse/Storage Function
The options for this field are Enabled and Disabled. By default, this field
is set to Disabled.