IBASE MI945 - Manual (Page 43)

BIOS SETUP
MI945 User’s Manual 39
Power Management Setup
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
PCI Express PM Function Press Enter ITEM HELP
ACPI Function Enabled
ACPI Suspend S3(STR)
RUN VGABIOS if S3 Resume Auto Menu Level >
Power Management User Define
Video Off Method V/H SYNC+ Blank
Video Off In Suspend Yes
Suspend Type Stop Grant
Modem Use IRQ 3
Suspend Mode Disabled
HDD Power Down Disabled
Soft-Off by PWR-BTTN Instant-Off
CPU THRM-Throttling 50.0%
Wake-Up by PCI Card Disabled
Power On by Ring Disabled
Resume by Alarm Disabled
Date (of Month) Alarm 0
Time (hh:mm:ss) Alarm 0 : 0 : 0
** Reload Global Timer Events **
Primary IDE 0 Disabled
Primary IDE 1 Disabled
Secondary IDE 0 Disabled
Secondary IDE 1 Disabled
FDD, COM, LPT Port Disabled
PCI PIRQ[A-D] #
HPET Support
HPET Mode Disabled
Disabled
32-bit mode
ACPI Function
Enable this function to support ACPI (Advance Configuration and Power
Interface).
ACPI Suspend
The default setting of the ACPI Suspend mode is S3(POS).
RUN VGABIOS if S3 Resume
The default setting of this field is Auto.
Power Management
This field allows you to select the type of power saving management
modes. There are four selections for Power Management.
Min. Power Saving Minimum power management
Max. Power Saving Maximum power management.
User Define Each of the ranges is from 1 min. to 1hr.
Except for HDD Power Down which
ranges from 1 min. to 15 min.