IBASE MB941 - Manual (Page 7)

INTRODUCTION
MB941 User’s Manual 3
Specifications
Product MB941
Form Factor Micro-ATX
CPU Type LGA775 soc ket for Intel® Core™2 Quad / Intel® Core™2 Duo / Celeron®
processors 800/1066/1333MHz FSB (45nm/65nm Technology)
Green /APM APM1.2
BIOS AMI BIOS, support ACPI Function
Chipset Intel® G41 (82G41) Express GMCH: 1254 FCBGA (25W)
Intel® ICH7 (82801GB): 652 BGA (3.3W)
Memory Slot 240 DIMM x 2 (w/o ECC), for DDR3-1066 / DDR3-800 MHz Max. 4GB, dual
channel
VGA Intel® G41 Integrated Graphics Controller (GMA X4500)
- Support DX10 and OpenGL2.1
- Dual independent display available through on-board VGA
- and DVI-D (via IBP192 on PCIe x16 slot) ~ optional
LAN Realtek RTL8111E PCI-E Gigabit LAN Controller x 2
USB ICH7 built-in USB 2.0 host controller, support 8 ports
- 4 ports on edge connectors
- 4 ports from pin headers
Serial ATA
Ports ICH7 built-in SATA controller, supports 4 ports
- SATA II (3.0 Gb/s)
Compact
Flash Slot ICH7 built-in one channel UDMA 33/66/100, for CF Type II (on component
side)
Audio Intel ICH7 built-in 7.1CH HD audio controller w/ Realtek ALC888 Codec
- Edge connector (6 audio jacks)
LPC I/O Winbond W83627UHG :
- COM1 (RS232/422/485), COM2 (RS232)
- COM3 (RS232), COM4 (RS232)
[with pin-9 with power for 4 ports (500 mA for each port)]
- CPU fan connector supports 4-wire fan with PWM control
- System fan connector x1 DC fan control
- System fan connector x1 w/o control
- Supports two thermal sensor (CPU + on-board)
- Voltage monitoring for VCC (processor), 3.3V, 5V, and 12V
- Hardware monitor (2 thermal inputs, 4 voltage monitor inputs, VID0-4 & 1 x
fan header)
Digital IO 4 in & 4 out
Expansion
Slots PCI-express (16x) slot x 1
PCI-Express(1x) slot x1
PCI slot x 2
IBASE
Proprietary
LPC Port 2 x 8 pins header x 1 for optional features:
- ID395-R for TPM 1.2 ~ Optional (Custom BIOS needed to support this
function)
- ID394-R for 4 additional serial Ports ~ Optional (Custom BIOS needed to
support this function)
Edge
Connector PS/2 KB/MS, COM1, CRT, LPT, HD audio
RJ45 + dual USB stack connector x 2 for LAN1~2 & USB1~4
On Board
Header/
Connector Standard SATA (7-pin shrouded vertical) connector x4
2x5-pin header x2 for USB 5~8, 2x5-pin DF11 x1 for COM2 (RS232)
2x10-pin DF11 x1 for COM3~4 (RS232)
, 2x5-pin header x1 for Digital I/O
4-pins header x1 for CPU fan & 3-pim headers x2 for system fan
2x8-pin box header for power switch/power LED/HDD LED/reset switch
Watchdog Timer Yes (2 56 segments, 0, 1, 2…255 sec/min)
Power
Connector ATX1 (24-pin connector for system)
ATX_12 (8-pin connector for CPU operating voltage)
Board Size 244mm x 244mm