IBASE IB908 - Manual (Page 39)

DRIVERS INSTALLATION
IB908F User’s Manual 35
AMT Configuration
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
Intel AMT Enabled
BIOS Hotkey Pressed Disabled
MEBx Selection Screen Disabled
Hide Un-Configure ME Confirmation Disabled
Un-Configure ME Disabled
Amt Wait Timer 0
Activate Remote Assistance Process Disabled
USB Configure Enabled
PET Progress Enabled
AMT CIRA Timeout 0
Watchdog Disabled
OS Timer 0
BIOS Timer 0
AMT Configuration
This configuration is supported iAMT function. Options are Enabled and
Disabled.
Note: iAMT H/W is always enabled. This option just controls the BIOS
extension execution. If enabled, this requires additional firmware in the
SPI device.
Unconfigure ME
Perform AMT/ME unconfigure without password operation.
Amt Wait Timer
Set timer to wait before sending ASF_GET_BOOT_OPTIONS.
Activate Remote Assistance Process
Trigger CIRA boot.
PET Progress
User can Enable/Disable PET Events progress to receive PET events or
not.
Watchdog Timer
Enable/Disable Watchdog Timer.