IBASE IB827 - Manual (Page 43)

BIOS SETUP
IB827 User’s Manual 39
Power Management Setup
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
Power-Supply Type ATX ITEM HELP
ACPI Function Enabled Menu Level >
ACPI Suspend S1(POS)
RUN VGABIOS if S3 Resume Auto
Power Management User Define
Video Off Method V/H SYNC+Blank
Video Off In Suspend Yes
Suspend Type Stop Grant
Modem Use IRQ 3
HDD Power Down Disabled
Soft-Off by PWR-BTTN Instant-Off
CPU THRM-Throttling 50%
Wake-Up by PCI Card Disabled
Power On by Ring Disabled
Resume by Alarm Disabled
Date (of Month) Alarm 0
Time (hh:mm:ss) Alarm 0 : 0 : 0
** Reload Global Timer Events **
Primary IDE 0 Enabled
Primary IDE 1 Enabled
Secondary IDE 0 Enabled
Secondary IDE 1 Enabled
FDD, COM, LPT Port Enabled
PCI PIRQ[A-D] # Enabled
Power Supply Type
The default setting is ATX. The other setting is AT mode.
ACPI Function
Enable this function to support ACPI (Advance Configuration and
Power Interface).
ACPI Suspend
The default setting of the ACPI Suspend mode is S1(POS).
RUN VGABIOS if S3 Resume
The default setting of this field is Auto.