Pnp/pci configurations, Bios setup, Ib827 user’s manual – IBASE IB827 User Manual

Page 46

Advertising
background image

BIOS SETUP

42

IB827 User’s Manual


PNP/PCI Configurations

This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.

Phoenix - AwardBIOS CMOS Setup Utility

PnP/PCI Configurations

PNP OS Installed

No ITEM

HELP

Init Display First

PCI Slot

Menu Level

Reset Configuration Data

Disabled

Select Yes if you are

Resources Controlled By

Auto (ESCD)

using a Plug and Play
capable operating
system Select No if
you need the BIOS to
configure non-boot
devices



IRQ Resources

Press Enter

DMA Resource

Press Ente

PCI/VGA Palette Snoop

Disabled

**PCI Express relative items**

Maximum Payload Size

128

PNP OS Install
Enable the PNP OS Install option if it is supported by the
operating system installed. The default value is No.

Init Display First
The default setting is PCI Card.

Reset Configuration Data
This field allows you to determine whether to reset the configuration
data or not. The default value is Disabled.

Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
with the use of a PnP operating system such as Windows 95.

PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly.
This field allows you to set whether or not MPEG ISA/VESA VGA
cards can work with PCI/VGA. When this field is enabled, a PCI/VGA
can work with an MPEG ISA/VESA VGA card. When this field is
disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.

Maximum Payload Size
The default setting of the PCI Express Maximum Payload Size is 128.



Advertising