IBASE IB945 - Manual (Page 9)

INSTALLATIONS
IB945 User’s Manual 5
Installing the Memory
The IB945 CPU Card supports four DDR3 memory sockets for a
maximum total memory of 8GB. It supports DDRIII 800/1066.
Installing and Removing Memory Modules
To install the DDR3 modules, locate the memory slot on the board and
perform the following steps:
1. Hold the DDR3 module so that the key of the DDR3 module align
with that on the memory slot.
2. Gently push the DDR3 module in an upright position until the clips of
the slot close to hold the DDR3 module in place when the DDR
module touches the bottom of the slot.
3. To remove the DDR3 module, press the clips with both hands.
DDR2 Module
Lock Lock
Lock Lock
IMPORTANT: Ensure that the power supply is OFF during CPU and
memory module installation.