IBASE SI-60E - Manual (Page 81)

Copyright © 2013 IBASE Technology Inc. All Rights Reserved.
73 IBASE Technology Inc.
How to Setting 1x4 Display
Step 1: Enter to Display Control Page
Step 2: Go to Mode Status Press Enter
Step 3: Press Up / Down Key Select to Stretch
Step 4: Go to Display Layout to Select 1x4
Step 5: Go to UP or DOWN Port select a Display Resolution
Step 6: Go to Display Driver Control Page
Step 7: Setting the two Monitor to H Combine Condition
Step 8: Adjustment H Bezel
How to Setting 2x2 Display
Step 1: Enter to Display Control Page
Step 2: Go to Mode Status Press Enter
Step 3: Press Up / Down Key Select to Stretch
Step 4: Go to Display Layout to Select 2x2
Step 5: Go to UP or DOWN Port select a Display Resolution
Step 6: Go to Display Driver Control Page
Step 7: Setting the two Monitor to V Combine Condition
Step 8: Adjustment H Bezel Value
Step 9: Adjustment V Bezel Value