IBASE SI-38 - Manual (Page 47)

47
Set_6106_LD(0x08);
//switch to logic device 7
Set_6106_Reg(0x30, 0x00); //enable timer
}
//---------------------------------------------------------------------------
//
// THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY
// KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR
// PURPOSE.
//
//---------------------------------------------------------------------------
#include "6106.H"
#include <dos.h>
//---------------------------------------------------------------------------
unsigned int 6106_BASE;
void Unlock_6106 (void);
void Lock_6106 (void);
//---------------------------------------------------------------------------
unsigned int Init_6106(void)
{
unsigned int result;
unsigned char ucDid;
F81865_BASE = 0x4E;
result = 6106_BASE;
ucDid = Get_6106_Reg(0x20);
if (ucDid == 0x07)
//Fintek 81865
{
goto Init_Finish;