IBASE SI-58 - Manual (Page 19)

19
2. To seat the memory module into the socket, apply firm and even pressure to
each end of the module until you feel it slip down into the socket.
3. With the module properly seated in the socket, rotate the module downward.
Continue pressing downward until the clips at each end lock into position.
4. To remove the DDR3 module, press the clips with both hands.
Setting Jumper
Jumpers are used on IB958 to select various settings and features according to your
needs and applications. Contact your supplier if you have doubts about the best
configuration for your needs. The following lists the connectors on IB958 and their
respective functions.
Jumper Locations on IB958 Page 15
JP1: Clear CMOS Contents Page 15
JP2: Clear ME Contents Page 16
J8: Flash Descriptor Security Overide (Factory use only) Page 16