IBASE SI-58 - Manual (Page 42)

42
Device reset time-out
USB mass storage device Start Unit command time-out.
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host Controller. ‘Auto’
uses default value: for a Root port it is 100 ms, for a hub port the delay is taken from Hub
Descriptor.
Super IO Configuration
System Super IO Chip Parameters.
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
Super IO Configuration
→ ← Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save & Exit
ESC: Exit
Super IO Chip Winbond W83627DHG
► Serial Port 0 Configuration
► Serial Port 1 Configuration
Power Failure Always off
Serial Port Configuration
Set Parameters of Serial Ports. User can Enable/Disable the serial port and Select an
optimal settings for the Super IO Device.
Power Failure
Options are:
Keep last state
Always on
Always off (default)