IBASE IPPCXXB9-RE - Manual (Page 50)

42 IPPCxxB9-RE User Manual
USB Configuration
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
USB Configuration
→ ← Select Screen
↑↓Select Item
Enter: Select
+- Change Field
F1:
General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
XHCI Pre-Boot Driver Disabled
xHCI Mode Auto
HS Port #1 Switchable Enabled
HS Port #2 Switchable Enabled
HS Port #3 Switchable Enabled
HS Port #4 Switchable Enabled
xHCI Streams Enabled
EHCI1 Enabled
EHCI2 Enabled
USB Ports Per-Port Disable Control Disabled
HS Port #1/2/3/4 Switchable
Allows for HS port switching between xHCI and EHCI. If disabled, port is routed to
EHCI. If HS port is routed to xHCI, the corresponding SS port is enabled.
xHCI Streams
Enable or disable xHCI Maximum Primary Stream Array Size.
EHCI1/2
Control the USAB EHCI (USB 2.0) functions. One EHCI controller must always be
enabled.
USB Ports Per-Port Disable Control
Control each of the USB ports (0~13) disabling.