Boot settings, Setup prompt timeout, Bootup numlock state – IBASE IPPCXXB9-RE User Manual
Page 54: Quiet boot, Fast boot, Gatea20 active, Option rom messages, Int19 trap response, Boot option priorities
46
IPPCxxB9-RE User Manual
Boot Settings
This section allows you to configure the boot settings.
Aptio Setup Utility
Main Advanced Chipset
Boot Security Save & Exit
Boot Configuration
→ ←
Select Screen
↑↓Select Item
Enter: Select
+- Change Field
F1:
General Help
F2:
Previous Values
F3: Optimized Default
F4: Save ESC: Exit
Setup Prompt Timeout
1
Bootup NumLock State
On
Quiet Boot
Disabled
Fast Boot
Disabled
CSM16 Module Version
07.69
GateA20 Active
Upon Request
Option ROM Messages
Force BIOS
INT19 Trap Response
Immediate
Boot Option Priorities
► CSM parameters
Setup Prompt Timeout
Number of seconds to wait for setup activation key.
65535(0xFFFF) means indefinite waiting.
Bootup NumLock State
Select the keyboard NumLock state.
Quiet Boot
Enables/Disables Quiet Boot option.
Fast Boot
Enables/Disables boot with initialization of a minimal set of devices required to launch
active boot option. Has no effect for BBS boot options.
GateA20 Active
UPON REQUEST
– GA20 can be disabled using BIOS services.
ALWAYS
– do not allow disabling GA20; this option is useful when any RT code is
executed above 1MB.
Option ROM Messages
Set display mode for Option ROM. Options are Force BIOS and Keep Current.
INT19 Trap Response
Enable: Allows Option ROMs to trap Int 19.
Boot Option Priorities
Sets the system boot order.