IHSE USA 474 Series Draco major - Manual (Page 51)

Configuration
2011-10-11 51
5.2 Control of the Draco major
5.2.1 Control via OSD
Via On-Screen-Display (OSD) you can do all of the settings for the Draco
major operating system from every single console. The settings are
described in the submenu Configuration. All the other submenus are
described in later chapters.
Entering OSD
1. Open Command Mode with the 'Hot Key' (see Chapter 5.1, Page 49).
2. Press <o> to open OSD. The menu KVM-List is opened as a start
menu.
3. Press <Esc> to enter the main menu.
If the option Listview is not active, KVM Switch view will be shown.
Leaving OSD
 Press keys <Shift> + <Esc>.
OSD will be closed without any further change and the currently
selected CPU connection will be established.