ikan MD7 User Manual
Page 4
4
3B
Safety Instructions
To help avoid damaging your monitor, connect only one power (AC or DC) in
operation simultaniously.
Rough handling of product may cause physical damage or malfunction.
Never insert anything metallic into the monitor openings. Doing so may create
the danger of electric shock.
To avoid electric shock, never touch the inside of the monitor. Only a qualified
service personnel should open the monitor’s case.
Openings in the monitor cabinet are provided for ventilation. To prevent
overheating, these openings should not be blocked or covered.
Put your monitor in a location with low humidity and a minimum of dust. Avoid
places like damp basement or dusty hallways.
Place the monitor on a solid surface and treat it carefully. The screen is made of
glass and can be damaged if dropped or sharply hit.
Do not attempt to remove the back cover, as you will be exposed to a shock
hazard. The back cover should only be removed by qualified service personnel.
Unplug the monitor power before you connect external devices to the monitor.
If your monitor does not operate normally, or if there are any unusual sounds or
smells coming from it, unplug it immediately and contact us.
Please do not disassemble the monitor. Opening the case will void the warranty.
Displaying a fixed picture for a long time may cause an afterimage or dead
spots. To recover LCD pixels, display whole white picture on screen for 1-2
hours and pixels will be recovered.
No service will be provided for user’s own color calibration.