ikan VX17e - Manual (Page 6)

VX17e
17" 3G- SDI Monitor QUICKSTART GUIDE
www.ikancorp.com 713-272-8822
DESCRIPTION OF FEATURES
System Configuration > Menu Setup > User 1 - User 5
This function recalls user defined values settings .The user setting will remain in memory indefinitely and can be
erased by using the reset option in the main menu.
DSLR Autoscaling
This function will allow users to extend their DSLR camera’s HDMI video output any option of four – Normal, 3:2, 16:9
or Full Screen – convenience made simple.
Guides > Crosshair
Display a crosshair on the center of screen.
Color Temerature > Manual > RGB Setup
Allows you to manually control the red, blue, and green channels from 0 - 255.
Function Setup > Check Field
Allows to see the image in monochrome or only the red, blue, or green channels.
Function Setup > Pixel
A signal of any other resolution is scaled to fit this native resolution. There may be time when it is desired to view the
incoming signal without scaling. Enabling Pixel to Pixel mode turns off the scaling and displays a 1440 x 900 pixel
window of the original image. Each pixel of the panel displays one pixel of the original image. The user may use the
scroll wheel on top of the monitor to move the window left, right. Push the scroll wheel again to toggle up and down.
Function Setup > Peaking
This is equipped with Monochrome Peaking features which highlight the desired focus area in a bright, red outline.
The operator adjusts the focus control until the red indicator outlines on the desired area are razor sharp, indicating
optimal focus. For the best results, be sure the subject is properly exposed.
Function Setup > False Color
The False Color feature utilizes a full spectrum of assigned color indicators, ensuring flawless shot exposure. As the
camera Iris is adjusted, the subject of the image will change color based on specific brightness values indicating
optimal exposure. See included chart for color assignments.
Function Setup > Luma Under Warn / Luma Over Warn
Adjustable Under Exposure and Over Exposed Waning feature gives the operator full control of the False Color
brightness values. By setting the preferred IRE exposure limits, the operator is warned when the image exposure is
exceeding or falling under the preset IRE limit, providing customizable, full image exposure control.
Function Setup > Clip Guide
This adjustable upper Clip Guide levels to accurately display overexposed images in any shooting condition. The
operator simply assigns the upper IRE to their preference and any exposure over the set IRE limit will flash in a vivid
purple, indicating only the over exposed area.