Intellinav 2 Quick Start - Manual (Page 7)

5
Quick Start Guide
Installing the Intellinav 2 in your vehicle
Mounting the Suction Cup
1. Press the suction cup firmly against the windshield.
2. Press down the lever to fix the suction cup in place.
3. Adjust the angles of the arms to achieve the best viewing
position.
Mounting the Cradle and GPS
1. Press the lever to lock or unlock the cradle.
2. Insert the GPS unit bottom in first, and then lock it using the lever
on the top.
Charging the Battery
1. Prior to first use, please use the AC adapter to fully charge the unit
for 4-6 hours, until battery LED turns green.
2. In the vehicle, you may plug in the car charger to provide
continuous power. On a full charge, the unit can operate between
2 to 3 hours.
3. To charge the battery, the Battery On/Off switch at the bottom of
the unit must in the On position.
4. To preserve battery power, set the Battery On/Off switch to the
OFF position.