Interactive Toy Concepts Goose Hunter - Manual

Web site: www.interactivetoy.com
PLEASE! DO NOT RETURN THIS
PRODUCT TO ANY RETAIL STORE!
PLEASE! DO NOT RETURN THIS
PRODUCT TO ANY RETAIL STORE!
For any questions or problems with this product please contact us at:
Email: [email protected]
Phone: Inside North America: +1-416-444-6873
Outside North America: 1-866-214-2220
Address: Interactive Toy Concepts,
1192 Martin Grove Road, Toronto, Ontario, Canada. M9W 5M9
IMPORTANT SAFETY INFORMATION
Goose Hunter is a registered trademarks of Interactive Toy Concepts.
© 2009. All Rights Reserved. Manufactured by and distributed by InteractiveToy Concepts Ltd.
Patent Information: EU: EP1958681 US: US2008191100 Canada: CA2607358 Aus: AU2007231617
Products and colors may vary. MADE IN CHINA. INS-44043-91116-US
INSTRUCTION
MANUAL
8+
Item# 44043
Congratulations on
your purchase of the
GOOSE HUNTER
IMPORTANT BATTERY INFORMATION:
Do not mix old and new batteries, different types of batteries, standard carbon zinc, alkaline or rechargeable of
different capacities. Rechargeable batteries are only to be charged under adult supervision. Please respect the
correct polarity (-) or (+). Do not try to recharge non-rechargeable batteries. Do not throw batteries into the fire.
Replace all batteries of the same type/brand at the same time. The supply terminals are not to be short-circuited.
Remove exhausted batteries from the toy. Batteries should be replaced by adults. Remove batteries if the toy is
not going to be played with for some time. The packaging should be kept since it contains important information.
Limited 30-day warranty
Product is warranted by Interactive Toy Concepts Limited against manufacturing defects in material
and workmanship under normal use for (30) days from the date of purchase.
Warranty is validated upon receipt of proof or purchase
and confirmation of UPC code.
Proof of Purchase
The GOOSE HUNTER is a revolutionary new toy
that allows anyone to have the virtual learning experience of
hunting a Goose in complete safety.
The GOOSE HUNTER Laser Blaster uses a narrow infrared beam to shoot down
a fully functional, flying “ornithopter” Goose. An ornithopter is a device that flies by
flapping its wings. Thus, the ornithopter Goose’s flying pattern is very life-like. The
Goose will fly for 30-40 seconds from a 10 second charge. The body of the Goose
is made of an ultra-light and flexible foam which provides excellent structure and
resistance to damage. Since the flying direction of the Goose can be preset, it is
possible to play with the ifly GOOSE HUNTER indoors or outdoors. It takes 3 direct
hits from the infrared blaster to bring down the Goose. It is possible to have a
competitive game-play with any number of multiple players or to practice solo target
shooting accuracy.
A multiple player game-play consists of counting the number of shots fired to bring
down the Goose. The person who fires the least amount of shots is the winner.
INSTRUCTION MANUAL
1 Charger/
Display Stand
Do not modify your GOOSE HUNTER. Do not use in strong winds, use only in VERY mild conditions! Do not use in rain, snow or around heavy
debris! Do not use near electrical lines! Do not use around smoke or flames! Do not use around water! Do not use around electricity! Do not use
in crowded areas! Do not use around air conditioning! Do not use around air vents! Do not use around ceiling fans! Do not use around large
obstacles! Do not use in very small spaces! Do be conscious of changes in your area! Any changes or modifications to this product are strictly
prohibited and will void product warranty. Keep moving wings away from eyes, hands, hair and loose clothing. Always turn off your GOOSE
HUNTER and Infra-red Laser Blaster when not in use. Always remove batteries from Infra-red Laser Blaster during storage. Always replace
Infra-red Laser Blaster with NEW alkaline batteries for optimal performance. Keep your instruction manual in a safe place for future use. Only
use the provided Infra-red Laser Blaster included with the GOOSE HUNTER to charge the lithium polymer battery installed in the GOOSE
HUNTER.
1 “GOOSE HUNTER” Flying Goose
The GOOSE HUNTER
has been carefully
packaged to avoid
damage during
shipping.
PLEASE USE
CAUTION WHEN
UNPACKING.
TM
You can replace the original wings on your GOOSE HUNTER if they become damaged. A new set of wings can be purchased by
contacting Interactive Toy Concepts listed above.
To replace the wings, do the following:
1. Make sure the Goose and the Laser Blaster are turned off.
2. Gently remove the far corner of the wing that is tethered to the body by a ball joint.
3. The leading (front) edge of the wing is a thin carbon fiber rod. Gently pull this rod out of the gear box mechanism housing at
the front.
4. Installation of the new wing is the reverse of the wing removal procedure with the following minor difference.
5. The carbon fiber rod has a slight notch cut into its end so that it will only fit properly into gear box mechanism housing one way. Use
caution when inserting the carbon fiber rod. If it is not going in smoothly, it is misaligned.
REPLACING GOOSE HUNTER MAIN WINGS
FCC NOTE: U.S. ONLY
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These Limits are designed to provide reasonable protection against harmful interference
in a residential installation. This generates, uses and can radiate radio frequency energy and if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the
following measures: - Reorient or relocate the receiving antenna - Increase the separation between the equipment and receiver -
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected - Consult the dealer or an
experienced radio/TV technician for help.
1 Infrared
Laser Blaster/
Portable Charger