Desa CCL3924PRA - Manual (Page 18)

www.desatech.com 111161-01H 18
5. Locate pegs on the bottom of crossover log
(#5). Slide these pegs into the holes located
in crossover log (#4) and front log (#1). See
Figure 27.
For CCL3018PR/NR Only:
Locate holes on the
bottom of crossover log (#5). Slide the holes
over the left pegs on middle log (#2) and front
log (#1). See Figure 28.
6. Locate pegs on the bottom of crossover log (#6).
Slide these pegs into the holes located in middle
log (#2) and front log (#1). See Figure 29.
7.
For CCL3930PR/NR only
, locate holes on the
bottom of crossover log (#7). Slide onto the
pegs located in crossover log (#6) and middle
log (#2). See Figure 30.
8. Add lava rock around base of heater if de-
sired. Do not place any lava rock on logs or
burner.
INSTALLATION
Continued
AUTO OFF ON
Figure 26 - Installing Crossover Log (#4)
(CCL3930PR/NR Shown)
Log #
Log #3
Pegs
Figure 27 - Installing Crossover Log (#5)
(CCL3930PR/NR Shown)
AUTO OFF ON
7
Figure 30 - Installing Crossover Log
(#7) to Models CCL3930PR/PRA and
CCL3930NR/NRA Only
Middle Log
(#)
Crossover
Log (#6)
Holes
Pegs
Figure 29 - Installing Crossover Log (#6)
(CCL3930PR/NR Shown)
AUTO OFF ON
Crossover
Log (#4)
Front Log (#1)
Figure 28 - Installing Crossover Log (#5)
(CCL3018PR/PRA and CCL3018NR/NRA Only)
Crossover
Log (#4)
Front Log
(#1)
AUTO OFF ON
6
Pegs
Log #
Front Log (#1)