Denon RCD-CX1 - Manual (Page 14)


ENGLISH
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Set
ting the
Timer
Other F
unctions
Tr
oubleshooting
Specifi
cations
[MENU/SET]
[2/u]
[5/ENTER]
[8/i]
[TIME/DISPLAY]
ON/STANDBY
[VOLUME df ]
SOURCE
1 /3
ON/STANDBY
SOURCE
<PHONES>
<2/5> 1/3
<VOLUME>
Button located on both the main unit and the remote control
unit
BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
G ExampleH Setting the current time to 10:15 am
1
Press ON/STANDBY to turn the power on.
2 Press and hold in [TIME/DISPLAY] .
The time is displayed.
3
Press and hold in [MENU/SET] to enter time setting
mode.
“TIME Adj” is displayed for about 2 seconds.
4 Use [2/u] or [8/i] to set the “hours”.
5 Press [MENU/SET] or [5/ENTER] .
The “minutes” display fl ashes.
6
Use [2/u] or [8/i] to set the “minutes”.
7 Press [MENU/SET] or [5/ENTER] .
The current time is set, and the normal display reappears.
TIME Adj TIME Adj
AM10:00 AM10:00
AM10:00 AM10:00
AM10:15 AM10:15
n Checking the current time when the power is on
Press and hold in [TIME/DISPLAY] .
Press once more and the display returns to its original condition.
n Checking the current time when the power is set
to standby
Press [TIME/DISPLAY] .
Press once more, and the standby display is resumed.
Displaying the time when the power is set to standby consumes
electricity. To reduce electric consumption, turn the time display off.
NOTE
The time cannot be set when in the standby mode. Turn on the power
fi rst.
Set
up
Setup
Setting the Current Time
(12-Hour Display)
1.RCD-CX1E3_ENG.indd 11 2008/06/30 11:12:37