Denon RCD-CX1 - Manual (Page 15)

Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Set
ting the
Timer
Other F
unctions
Tr
oubleshooting
ENGLISH
Specifications

Setting the layer to be played with
priority
• The layer that is played with priority when the disc is loaded can be
set.
• Upon purchase, the priority layer is set to the “SA-CD”.
[Selectable items]
SA-CD
: The SA-CD layer mode for Super Audio CDs.
CD
: The CD layer mode for Super Audio CDs.
This setting is stored in the RCD-CX1’s memory and is not canceled
even when the disc tray is opened or closed or the power is turned on
or off. To change the setting, perform the above procedure again.
Loading Discs
In the stop mode, press <2/5> to open the disc tray.
b “Loading Discs” (vpage 3).
n To close the disc tray
Press <2/5> again.
b The disc tray also closes when 1 /3 is pressed.
NOTE
• The power must be on when opening and closing the disc tray.
• Do not push the disc tray in by hand when the power is off. Doing so
can damage it.
• Do not insert foreign objects into the disc tray. Doing so will damage it.
Pla
ybac
k
Playback
Turning the Power On
NOTE
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time or when traveling, either press
ON/STANDBY to turn
off the power, or unplug the power cord from the power outlet.
• Be sure to stop playback before turning the power off.
Press ON/STANDBY .
• The power turns on. Press again to set the power to standby.
• When the power is turned on, the function that was being used
when the power was last turned off is selected (vpage 22 “Last
function memory”).
G
When the last function was CDH
When no disc is loaded, “NO DISC” is displayed.
n Completely turning off the power
Unplug the power cord from the wall outlet.
b Note that the time setting is cleared when the power cord is
unplugged from the outlet.
b The settings made for the various functions may be cleared if the
power cord is left unplugged from a power outlet for an extended
period of time.
Power indicator
Standby ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ Off
Power on ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ Red
When the timer is set ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙Orange
Preparations
1
When “NO DISC” is displayed, press and hold
[MENU/SET] .
The current priority layer is displayed.
2
Press [MENU/SET] again and select the layer to be
played with priority.
SA-CD CD
Adjusting the Master Volume
Either turn <VOLUME> or press [VOLUME df] .
The volume level is displayed.
[Variable range] –90.0dB ~ 0.0dB
b When lowering the volume from –90.0 dB, the display shows
“– –.– dB”.
Input Source Switching
Press SOURCE to select input source.
CD TUNER PHONO
LINE1 (iPod) LINE2
b
b The “iPod” indicator is displayed when a Control Dock for iPod is
connected. (“NO iPod” is displayed if no iPod is connected to the
Control Dock for iPod.)
Listening with Headphones
Plug the headphones (sold separately) into the <PHONES> .
b The sound from the speakers is automatically cut off.
NOTE
Be careful not to set the volume too high when using headphones.
Operations During Playback
1.RCD-CX1E3_ENG.indd 12 2008/06/30 11:12:38