Datalogic Scanning GRYPHON GM4100 - Manual (Page 14)

Setting Up the Reader
10 Gryphon™ I GM4100
Install the Batteries
To install or change the battery of your reader, you must:
1. With a screwdriver, unscrew the battery cover screw.
2. Unplug the three screws securing the battery holder, and
unplug the white connector.
NOTE
Before installing the Battery, read “Battery Safety” on
the preceding pages. Datalogic recommends annual
replacement of rechargeable battery packs to ensure
maximum performance.
Connector
Screw
Screw
Screw