Configuring the base station, Changing the base station position – Datalogic Scanning GRYPHON GM4100 User Manual

Page 16

Advertising
background image

Configuring the Base Station

12

Gryphon™ I GM4100

Configuring the Base Station

The base charger/station may be configured in desk application to
hold the reader in two different positions, either a horizontal or
standing position, in order to provide the most comfortable use
depending on needs.

Changing the Base Station Position

The base station is configured by installing one of two sets of me-
chanical parts that come with the cordless kit. The default mounts
(shown below) provide three options: vertical (wall) mounting,
standing (45°), or horizontal mounting with a higher mechanical
retention of the scanner. Use the other mounts only for horizontal
mounting, with lower retention of the scanner. The different
parts may be interchanged to customize retention preferences.

1.

Insert the appropriate parts for the desired base station
position, as shown below.

A tool such as a rigid pen or a flat screwdriver can be used
to change the mounts. Do not allow it to touch the con-
tacts.

Standing

Horizontal

Standing,

Horizontal

Horizontal
or Vertical

Only

Advertising