Datalogic Scanning GRYPHON GM4100 - Manual (Page 21)

Linking the Reader to a Base Station
Quick Reference Guide 17
Linking the Reader to a Base Station
RF Devices
For RF devices, before configuring the interface it is necessary to
link the handheld with the base.
To link the handheld and the base, press the trigger to wake it and
place it on the base. If the reader was previously linked to another
base, you must first scan the Unlink action command before re-
linking to the new base.
System and Network Layouts
Stand Alone Layouts
Figure 6. Single Reader Layout
Unlink