Kleenmaid CM02X - Manual (Page 4)

4
AMC21
Safety instructions and warnings
IC34
This machine complies with the current safety regulations. Incorrect use of the machine may cause harm.
Read the instructions carefully before using the machine. They contain important information on safety and use and care
in order to protect the user, and to avoid damaging the machine.
Correct use
• This machine is designed solely for preparing espresso, frothing milk and for boiling water for tea and other hot drinks.
Other types of use are not permitted and may prove dangerous. The manufacturer will not be held liable for any
damage and/or injury caused by incorrect use of the machine.
Technical safety
• Before connecting the machine to the electricity supply, check the connection data (voltage and frequency) on page
with that of the electricity supply carefully. This data should be exactly the same to avoid damaging the
machine. In case of doubt, contact a qualified electrician.
• The electrical safety of the machine is only guaranteed if it is connected to a regulation earth wire. It is very important
to check this carefully. In case of doubt, have the electricity supply checked by a qualified electrician. The
manufacturer will not be held liable for any harm or damage caused due to a lack or malfunctioning of the earth wire
(e.g. risk of electric shock).
• Only operate the machine when built-in so as to avoid contact with the electric parts. For the assembly, dismantling
and daily maintenance of the machine, always make sure it is disconnected from the electricity supply.
• The machine should not be connected to the electricity supply with extension cables, as these do not provide the
necessary safety for the machine (e.g. danger of overheating).
• The machine must be built into a cabinet. It is not suitable for freestanding or outdoor use. Due to the weight of the
machine, the cabinet must be secured firmly to the wall.
• Installation, maintenance and repair works must only be carried out by qualified persons. Any installation,
maintenance and repair works carried out incorrectly may cause considerable danger to the user, for which the
manufacturer will not assume any liability.
• The machine should only be disconnected from the electricity supply when:
-The main switch of the electricity supply is disconnected;
-The fuse for the house electricity supply is removed;
-The plug to the machine is taken out of the electricity socket. To disconnect the machine from the electricity supply,
unplug without pulling on the cable.
• Under no circumstances should the machine casing be opened. Touching the voltage cables or changing the
electrical and mechanical structure may cause danger of electric shock. It may also affect the operation of the
machine. The manufacturer declines all responsibility for persons or property if the above instructions are not
observed in full.
• If the machine is to be built-in with other appliances, they must be separated by a shelf.