Kleenmaid S9 February 2006 - Manual (Page 16)

Instructions for the installer
16
4. Final operations
4.1 Fixing the free-standing cooking hob
Once the gas pipes and electric cables have been connected, the free-standing cooking hob must
be fixed to the support unit using the brackets A provided and the four screws B.
Make sure that the gas pipes and electric cables are not crushed or obstructed.
4.2 Levelling the cooker to the floor
After having made the electrical and gas hook-ups, level the cooker to the
floor using the adjustable feet that were previously screwed onto the bottom
of the cooker.
Should it be necessary to drag the cooker, screw the feet in completely and carry out the final
regulation only when the other operations are completed.
Check all connections for gas leaks with soap and water. DO NOT use a naked flame for detecting
leaks. Ignite all burners to ensure correct operation of gas valves, burners and ignition. Turn gas
taps to low flame position and observe stability of the flame. When satisfied with the hotplate,
please instruct the user on the correct method of operation. In case the appliance fails to operate
correctly after all checks have been carried out, refer to the authorised service provider in your
area.