Kleenmaid IB61 - Manual (Page 6)

4
For the user
Safety
Check regularly that there are no objects (tea towel, paper, etc.) which might block the air
inlet located below your hob (see fitting P. 12).
• “Electronic” safety feature
A sensor constantly monitors the temperature of the electronic circuits. If the
temperature rises too high the power supplied by the hob will be reduced.
• “Empty pan” safety feature
Each heating zone is fitted with a sensor which constantly monitors its surface
temperature, so no more danger of overheating caused by empty pans.
• Detection of an object or a pan on a heating zone
A small object such as a fork, a spoon or even a ring left on the hob is not
detected as a saucepan.
The display flashes and no heating power is produced.
The safety system acts in the same way when it detects a pan which is not suitable
for cooking by induction.
IMPORTANT: If an oven is located under your hob (see installation options) the
thermal safety devices on the hob will prevent its simultaneous use when the oven
is in pyrolysis mode.
For the attention of wearers of pacemakers
and active implants:
The functioning of the hob is in conformity with current standards on electro-
magnetic interference.
Your induction hob also fully complies with the legal requirements (EC directives
89/336/EEC). It has been designed not to interfere with the operation of other
electrical appliances as long as these comply with the same legislation.
Your induction hob generates magnetic fields in its immediate area.
So that there is no interference between your hob and a pacemaker, the latter must
be designed in conformity with the relevant regulations.
In this respect, we can only guarantee the conformity of our own product.
Insofar as the conformity of the pacemaker or any incompatibility is concerned,
you should consult its manufacturer or your doctor.