Kleenmaid TBR351ANBRWH User Manual

Page 7

Advertising
background image

2. Pull out the shroud assembly.
3. Loosen 2 screws holding fan motor bracket to remove

the fan and fan motor assembly.

3-5 DEF' CONTROL ASM

Def control ASM consists of Defrost Thermostat and FUSEÐM.
Defrost Thermostat functions to defrost automatically and it
is attached to the Evaporator and the metal side of the
case senses Temp.
Fuse-M is a kind of safety device for preventing over-
heating of the Heater when defrosting.
At the temperature of 77¡C, it stops the emission of TEMP
from the Defrost Heater.
1. After removing the Control Box, and Fan Grill loosen 2

screw and pull out the Shroud with it pulling with your
hand. (Figure 13)

2. Separate the 2 connectors connected with the Def

Control ASM and replace the Def Control ASM after
cutting the Tie Wrap and removing the Holder Fuse.
(Figure 14)

3-6 LAMP

3-6-1 Freezer
1. Remove all shelves in the freezer.
2. To remove the lamp cover, insert a 'Ñ' type driver in the

lower gap and pull out it as shown in (Figure 15).

3. Turn the lamp counterclockwise.

3-6-2 Refrigerator
1. Remove all shelves in the refrigerator.
2. Insert your hand in the lower aperture of the Lamp

Cover and remove it by pulling forward as shown in
(Figure 16).

3. Turn the lamp counterclockwise.

3-7 DAMPER CONTROL

1. Remove the control knob by pulling it out.
2. After removing the Lamp cover, loosen 2 screws fixing

the Damper control ASM to the body.

3. Remove the Damper control ASM and separate the

Damper and the Control box.

Figure 15

Figure 16

SHROUD-F

HOLDERS

FAN

DEF-THERMO

FUSE-M

HOLDER FUSE

Figure 13

Figure 14

SHROUD

FAN

FAN MOTOR

FAN MOTOR

BRACKET

Figure 12

DAMPER

CONTROL BOX

KNOB

LAMP COVER

Figure 17

- 7 -

Advertising