Kiddy World plus - Manual (Page 18)

To adjust the headrest height, grasp the headrest
height adjustment handle on the back of the
headrest (Fig. 19; No. 1) and pull it out gently and
then raise or lower the headrest (Fig. 19; No. 2)
to position the narrow area of the headrest in line
with the child's ears (Fig. 18). Release the
headrest height adjustment handle to lock
headrest in position.
Check that the headrest is securely locked, by
gently pushing down on headrest.
5.2 Toddler use mode - Installation
5.2.1 Installation using the LATCH system and top tether
17
Fig. 18
WRONG:
Headrest too high
CORRECT WRONG:
Headrest too low
Fig. 19
• Snuggly adjust the LATCH lower anchor belt and top tether to secure the
car seat. Snuggly adjust the protection shield around your child.
• LATCH belt and top tether must stay snuggly adjusted during use.
• Only use anchorages in the vehicle that are designated as LATCH
anchorages with spacing between anchorages of 11 in. (280 mm).
LATCH anchors with spacing between anchors of 10.2 in. and 17.7 in.
(260 mm to 450 mm) may be used only if permitted by the vehicle
manufacturer. Check the vehicle owner’s manual for LATCH use and
spacing information.
DEATH or SERIOUS INJURY can occur
WARNING
!