KIP 7170K - Manual (Page 40)

Chapter 2 Basic Operation 2-16
2. 5 Cut Sheet Media
1. Open the Bypass Feeder (1).
2. There are several size markings on the table of Bypass Feeder which indicate possible feed
positions. Place the cut sheet paper on the table between its concerning size markings then
insert it into the Bypass Feeder.
When the leading edge touches the feeding roller, the machine automatically carries and sets
the paper at the proper position.
NOTE
(1) As a curly cut sheet will cause a mis-feed, straighten the sheet as far as possible before
printing. And set the sheet in “curl down” direction as a mis-feed can be avoided. “Curl
up” sheets tend to result in a mis-feed.
Correct (curl down) Incorrect (curl up)
(2) Setting a cut sheet to the Bypass Feeder while the printer is processing a print job cause
a paper jam.
Bypass Feeder
size markings
OK NG