8 canceling sleep mode – KIP 7170K User Manual
Page 45
Chapter 2 Basic Operation
2-21
2. 8 Canceling Sleep Mode
The KIP 7170 has two Sleep Modes to reduce the power consumption.
The KIP 7170 will enter Sleep Mode after a certain period of inactivity.
In the default setting;
•
Warm Sleep Mode will start after a 15 minute of inactivity in order to reduce the power supply
for Fuser Unit.
•
Cold Sleep Mode will start after a 60 minute of inactivity to stop the power supply for Fuser
Unit and some other components.
Sleep Mode is canceled and the machine gets ready when;
•
the machine receives a print job through the network.
•
you tap on the UI screen then an original is inserted the scanner unit.
NOTE
(1) It may take time for the machine to get ready.
(2) Tapping on the UI screen can cancel the screensaver but the KIP 7170 needs to recover
temperature on Fuser Unit.
It may need another waiting time to start warming up for printing.
(3) Recommended Default Delay Times: 60min