La Crosse Technology WS-9065TWC - Manual (Page 13)

13
III. OUTDOOR TEMPERATURE
The temperature received from the remote temperature sensor is viewed in the
OUTDOOR LCD. When there is more than one remote temperature sensor unit in
operation, a “boxed” number will appear to the right of the temperature. This
indicates which remote temperature sensor unit (1, 2, or 3) is currently displaying its
data in the OUTDOOR LCD. (This feature is explained in further detail in section
V—Adding Remote Temperature Sensors).
IV. MINIMUM AND MAXIMUM TEMPERATURE RECORDS
The WS-9065U keeps a record of the MINIMUM and MAXIMUM temperature,
and the time and date of their occurrence—for both the indoor and outdoor modes.
A. VIEWING THE INDOOR TEMPERATURE RECORDS
1. Press the IN button once. “MIN” appears above the indoor
temperature and the LCD will flash, indicating that the
minimum temperature (along with the humidity measured at that
time) and the time and date of occurrence are displayed. The
minimum records will display for 30 seconds before returning to
the normal display mode.
2. Press the IN button again (once while “MIN” is still displayed,
twice otherwise). “MAX” appears above the indoor temperature
and the LCD will flash, indicating that the maximum
temperature (along with the humidity measured at that time) and
the time and date of occurrence are displayed.
3. While “MAX” is still displayed press the IN button again to
return to the current data display. Or you can wait 30 seconds,
during either the minimum or the maximum readings, and the
unit will automatically return to current data readings.
B. VIEWING THE OUTDOOR TEMPERATURE RECORDS
1. Press the OUT button once. “MIN” appears above the outdoor
temperature and the LCD will flash, indicating that the
minimum temperature, and the time and date of occurrence are
displayed. The minimum records will display for 30 seconds
before returning to the normal display mode.