Legrand Convia Enabled Walkerflex System - Manual (Page 2)

2
CNDU and CLDU Module & Flex Cables:
The CNDU and CLDU (CLDU is available for 3-6 wire configurations only) module is the main power source and interface to
the Convia Enabled Walkerflex System. It is to be fed from a distribution panel outfitted with appropriate circuit breakers to
protect wiring.
Cat. No. CNCS &CLCS
(Cable Set)
Cat. No. CAP3456 End Cap
(for 3-6 wire configurations)
Cat. No. CAP810 End Cap
(for 8-10 wire configurations)
Pow
er Out
Pow
er
In
Pow
er Out
Connected to
Protected Circuit(s)
Secure Box
in Place
NOTE: Cap Unused Connectors
On All Power Out Modules. CNDU & CLDU Distribution Unit:
Pow
er
In
Fee
d P
ow
er Out
Mate only identical Keys
and Configurations.
Cat. No. CNCS & CLCS
(Cable Set)
Current Flow
Direction
Current Flow
Direction
Cat. No. CNCBS & CLCBS
(Splitter)
Cat. No. CNCW & CLCW
(Cable Whip)
Cat. No. CNPA & CLPA
(Power Adapter)
Cat. No. CNWC & CLWC
(Wire Connector)
Current Flow
Direction
Current Flow
Direction
CAUTION: Do not make or break
connections while
circuits are energized.
CONVIA ENABLE WALKERFLEX SYSTEM INSTALLATION