Legrand Wallduct Medical Raceway System Bodies User Manual
Page 7
Step 1 For Cabinet Connectors – Remove cover
from unit, retain all fasteners.
Step 2 Fasten unit to duct body. Holes for connection
will need to be drilled in the straight body flanges
as necessary using a 9/32" [7.14mm] diameter
bit. Use the holes in the sweep cabinet connector
as a guide to drill the holes. Place palnut clips
over drilled holes. Re-position cabinet connector
to line up with palnut clips. Secure into place
using #10-32 machine screws provided.
Step 3 Attach cabinet connector to unit by adjusting
bottom to sit flush with cabinet and then
fasten with approporiate screws (provided
by others).
Step 4 Place wires and attach cover onto body with
screws provided.
SPECIFIC INSTRUCTIONS: SWEEP CABINET CONNECTORS
Cabinet connectors are used for applications to connect wallduct to electrical cabinets such as those in MRI rooms.