Stove and direct-vent burner system installation, Continued, Removing/replacing glass door – Desa (F)SDVBNC User Manual

Page 24

Advertising
background image

107304

For more information, visit www.desatech.com

For more information, visit www.desatech.com

24

REMOVING/REPLACING GLASS DOOR

You must remove glass door to install logs, lava rock, and ember
material. To remove glass door, you must first remove the front
panel on stove body.

CAUTION: Do not operate this burner system with

a broken glass door panel or without the glass door
panel securely in place. For replacement part infor-
mation see

Replacement Parts, page 33.

Figure 54 - Removing Glass Door from Burner System

STOVE AND DIRECT-VENT
BURNER SYSTEM
INSTALLATION

Continued

Figure 53 - Removing Front Panel from Stove

Figure 51 - Installing Battery in Hand-Held Remote Control Unit
(GHRC Series)

Installing 9-Volt Alkaline Battery in Hand-Held
Remote Control Unit

1.

Remove battery cover on back of remote control unit

2.

Attach terminal wires to a 9-volt battery (not included). Place
battery into the battery housing.

3.

Replace battery cover onto remote control unit.

Terminal
Wires

Battery
Cover

9-Volt
Battery

Remote
Control Unit

Battery
Housing

LO

H

I

P

IL

O

T

OFF

ON

Figure 50 - Installing Remote Receiver

Figure 52 - Installing Battery in Hand-Held Remote Control Unit
(GHRCTA Series)

Terminal
Wires

Battery
Cover

9-Volt
Battery

Remote
Control
Unit

Battery Housing

1.

Remove 2 bolts from bottom of stove (if still installed) and one
from the top of stove to remove front panel (see Figure 53).

2.

Remove the screws from the 2 tabs at the top of the glass door
while holding door securely keeping it from falling forward
(see Figure 54).

3.

Grasp door by both sides and ease it upward off of the lower
bracket (see Figure 54).

4.

To replace glass door, follow the above instructions in reverse.

4.

Place receiver into valve bracket and align holes (see Figure 50).

5.

Use push-in fasteners included with receiver to secure to
bracket.

6.

Connect the wires from the receiver to the valve at TH and
THTP (see Figure 46, page 22).

Bolt

Bolt

Stove Front
Panel

Screw

Glass
Door

STOVE AND DIRECT-VENT BURNER SYSTEM INSTALLATION

Installing Optional Wireless Hand-Held Remote Control Accessories - GHRC and GHRCTA Series (Cont.)
Removing/Replacing Glass Door

Advertising