Leprecon LP-3000 Series - Manual (Page 35)

System Tools Chapter Three 31
LP-3000 Users Manual
Clicking OK saves the current line assignment information. If you selected
more than one fixture, the LP-3000 displays defaults for the next fixture.
Repeat steps 7 and 8 for each fixture.
Clicking OK All also saves the current line assignment information.
However, if you selected more than one fixture, the LP-3000 assigns and
saves default settings for all of the remaining fixtures.
To Install a Moving Light Fixture into the System
1. From the Main screen, click Setup and then DMX Lines.
The LP-3000 displays the DMX Lines screen.
2. Click Add Fixture.
The LP-3000 displays the Add Fixture screen.
3. If necessary, click Switch to LTP.
Moving lights are referred to as “Last Takes Precedence” devices or “LTP”.
The LP-3000 displays a list of the LTP fixtures that have been installed in
the LP-3000 fixture library.