Leprecon LP-3000 Series - Manual (Page 78)

74 Chapter Six Cue Stacks
LP-3000 Users Manual
Several channels selected for editing:
13. Using the Modify edgewheel, adjust the level for the channel or channels.
14. When the level is correct, click At Level a second time.
This restores the marked block to a normal background and allows more
channels to be selected.
15. Repeat steps 8 through 14 for all channels that you want to edit.
16. Click Save to save the changes.
17. Click Discard to delete the changes and restore the settings to their original
values.
18. If desired, select another step and set levels for it.
19. When you are done, click Exit to Stack Builder.
Playing Back Cue Stacks
The Stack Run screen contains all controls that are used to play back stored cue
stacks.
The Stack Master fader—located on the master control panel—controls the levels
of the stack cues. No output will be seen on stage unless this fader is up.
To Play Back a Crossfade Stack
1. From the Main screen, click Stack.
The LP-3000 displays the Stack Run screen.