Lumens Technology 3D101 - Manual (Page 14)

English - 13
Chapter 5 Start Using
<Note>
Ensure that the USB cable is connected and Ladibug™ software is
installed at first. Refer to Chapter 4 Installation and Connections in this user
manual.
1. Double click on
icon to open Ladibug™ Software.
2. Move the mouse to icon, and the main function menu will be
displayed.
3. Place the object to be displayed under the camera.
4. Press to display the setting screen of POWER Frequency, and
follow the screen instructions. A live image is displayed when the setting
is finished. (※ This setting is required for the first use only.)
Note: You are advised to confirm the local voltage/frequency before
setting the POWER Frequency. For example, 60Hz is applicable for
America, Taiwan, Japan, etc; 50Hz is applicable for Europe or other
regions.
USB Cable
FOCUS