Mounting the dc210 at desktop, Connecting devices – Lumens Technology DC210 Quick Start User Manual
Page 4
English -
3
3. Mounting the DC210 at Desktop
1. Please set up the DIP Switch settings first. Refer to
Chapter 5 DIP Switch
Settings in the DC210 user manual
.
2. Please refer to the
Base Installation Guide
for installation instructions for
all parts.
4. Connecting Devices
4.1 Step 1: Plugging in the Power Outlet
<Note>: Appearance of power cord may vary with countries/regions.
4.2 Step 2: Connecting Peripherals
4.2.1 Connecting Projector
z
Use VGA cable to connect VGA OUTconnector on DC210 to a projector or
the VGA IN connector on a monitor.
4.2.2 Connecting Monitor
z
Use VGA cable to connect VGA PASSTHROUGH connector on DC210 to
the VGA IN connector on a monitor.
[Note] The VGA PASSTHROUGH connector
only outputs VGA IN signals.
AC Outlet