Lumens Technology DC210 Quick Start - Manual (Page 5)

English - 4
4.2.3 Connecting TV
1. Using C-Video cable to connect C-Video OUT connector on DC210 to TV.
2. Adjust DIP switch configuration
„ For USA, Taiwan, Panama. Philippines, Canada, Chile, Japan, Korea and
Mexico, please use NTSC:
„ For other countries or regions, please use PAL:
<Note>: In C-Video Mode, some buttons on the machine panel and
remote control are not working.
<Note>: It doesn’t support C-Video and VGA simultaneously. Once
C-Video is on, VGA OUT is not supported.
3. After DC210 is re-started, new DIP switch configuration is effective.