Denon DCD-2000AE - Manual (Page 14)

ENGLISH
Operation
1 2 3
4 5 6
7 8 9
+10 +10 CLEAR CLEAR 0
CALL CALL DIRECT DIRECT PROGRAM PROGRAM
TIME TIME
SUPER SUPER AUDIO CD AUDIO CD
SETUP SETUP DISPLA DISPLAY
ARTIST ARTIST TITLE TITLE
REPEA REPEAT RANDOM RANDOM
OPEN / CLOSE OPEN / CLOSE
RC-997
OPEN/CLOSE
DIRECT
PROGRAM
TITLE
RANDOM
NUMBER
CALL
CLEAR
+10
TIME
ARTIST
REPEAT
Finding the desired spot while listening to
the sound (Remote control unit only)
[Manual search]
• Use this function to skip forward or backward while
listening to the sound. This function comes in handy for
finding the desired spot in the middle of long tracks.
During playback, press and hold in the 7
button.
• When the button is released, normal playback resumes
from that point.
2 Searching forward
During playback, press and hold in the 6
button.
• When the button is released, normal playback resumes
from that point.
2 Searching backward
NOTE:
• The sound may be interrupted momentarily when
resuming normal playback from the manual search mode.
This is not a malfunction.
Playing the tracks in the desired order
(Remote control unit only) [Programmed play]
• Use this function to select the desired tracks on the disc
and play them in the desired order.
• Up to 30 tracks can be programmed.
1
In the stop mode, press the PROGRAM button.
• The “PROGRAM” indicator lights.
Playing the tracks in random order (Remote
control unit only) [Random play]
• Use this function to play all the tracks on the disc once in
random order.
1
In the stop mode, press the RANDOM button.
• The “RANDOM” indicator lights.
2 Press the 1 or 1 / 3 button.
• A track is selected automatically and playback starts.
During programmed playback:
The programmed tracks are played in random order.
During repeat playback:
The tracks are played once in random order, then
played again in a different order, and this is repeated.
To cancel random playback, press the RANDOM button
in the stop mode. Normal playback resumes.
If pressed during playback, random play starts from
that track.
Press the NUMBER and +10 buttons to select
the track to be programmed.
• For example, to program the 3rd track and the 12th
track,
press , , and . 2 +10 3 PROGRAM
Press the 1 or 1 / 3 button.
• The tracks are played in the programmed order.
To confirm the programmed playing order, press the
CALL button in the stop mode. The programmed
playing order appears in the display.
To cancel the entire program, press the
DIRECT button
or the 5 button in the stop mode.
If you program the wrong track, press the CLEAR
button, and then program the right track. (The last track
in the program is erased each time the
CLEAR button
is pressed.)
2
3
9
ENGLISH