Denon DCD-2000AE - Manual (Page 15)

ENGLISH
Operation
Timer-controlled playback
1
Press the TITLE button.
• The album title scrolls on the display.
2
Press the ARTIST button.
• The album’s artist name scrolls on the display.
• With Super Audio CDs that contain text information, the
text information included on the disc can be displayed
while in the stop or play mode.
• The album title, artist name and track titles can be
displayed.
• Displayable characters are capital and small letters,
numbers and some symbols.
To display text (Super Audio CD only)
2 Text display in the stop mode
2 Text display in the play mode
Press the TITLE button.
• The title of the currently playing track scrolls on the
display.
• To switch to the display of the recorded time while text
information is being displayed, press the TIME mode button.
• When the TITLE or ARTIST button is pressed, the text scrolls
once, then only the first 13 characters of the text are
displayed.
• When the track is switched while the track title is being
displayed, the title of the new track is scrolled.
• “NO TEXT” is displayed if the TITLE or ARTIST button is
pressed when a disc that does not contain text information
is loaded.
During playback, press the REPEAT button twice.
• The “REPEAT 1” indicator lights.
When the REPEAT button is pressed twice while in the
stop mode, the set is readied for playback of the first
track. Press the
1 button to start playback.
Press the REPEAT button once again to cancel the one-
track repeat mode. The display and playback return to
normal.
2 Playing a single track repeatedly
[One-track Repeat]
Repeat play (Remote control unit only)
1
2
Press the 1 or 1 / 3 button.
In the stop mode, press the REPEAT button
once.
• The “REPEAT ALL” indicator lights.
The all-track repeat mode can also be set by pressing
the
REPEAT button during playback.
The one-track repeat mode is set if the REPEAT button
is pressed again during repeat playback.
If the
REPEAT button is pressed during programmed
playback, the programmed tracks are played
repeatedly.
To cancel the all-track repeat mode, press the
REPEAT
button twice.
2 Playing all the tracks repeatedly
[All-track Repeat]
10
ENGLISH
1
Turn on the power of all system components.
4
Check the time on the timer and then set the
desired turn-on time.
2 Set the input selector on the amplifier to
correspond to the inputs the CD player is
connected to.
3
Make sure a disc has been loaded in the disc
holder.
5
6
Turn the audio timer ON.
When the preset turn-on time is reached,
power is turned on in the system components
and CD playback starts from the first track.
Power is turned off automatically in all components
connected to the timer.