Lumens Technology DC260 Quick Start - Manual (Page 11)

English - 10
6.
Start Using the DC260
6.1 Turn on the DC260
Control Panel Remote Control
z
When using the remote control, aim at the receptor on the DC260,
and press the power button.
z Once DC260 is turned on, the LED on the control panel will flash a
few times and stay lit. Please contact your distributor if the LED is not
on.
<Note> Once the password page is shown, please key in the
password. If you forget it, please contact your distributor or the
service center.
*For detailed menu function introduction and operation instructions, please refer
to the user manual.