Lumens Technology DC260 Quick Start - Manual (Page 7)

English - 6
4. Mounting the DC260 at Desktop
1. Please set up the DIP Switch settings first. Refer to chapter 5 "DIP
Switch Settings" in the DC260 user manual.
2. Please refer to the Base Installation Guide for installation instructions for
all parts.
5. Connecting Devices
5.1 Step 1: Plugging in the Power Outlet
<Note> Appearance of power cord may vary with countries/regions.
5.2 Step 2: Connecting with components
5.2.1 Connecting to a Projector or Monitor
z Connect the VGA Out on the DC260 to the VGA IN on the projector or the
monitor using the VGA cable.
5.2.2 Connecting to a TV
1. Use C-Video cable to connect TV.
AC Outlet