Lumens Technology VC-G50 - Manual (Page 31)

English - 30
Chapter 6 Descriptions of Major Functions
6.1 I would like to switch to VC-G50
1. Press [Camera 1 ~ 3] on the remote control to select VC-G50.
 Camera 1 ~ 3 is selected with IR SELECT.
6.2 I would like to save the current lens position data
1. Hold [Preset + ID] on the remote control to save the current position
data.
 ID shall be a digit [0 ~ 9].
 Use VISCA Command to save the position data to [0~127]
6.3 I would like to clear the saved position data
1. Hold [Reset + ID] on the remote control to clear the given position
data.
 ID shall be a digit [0 ~ 9].
 Use VISCA Command to clear the position data of [0~127]
6.4 I would like to turn on the back light compensation
function
1. Press [Back Light] on the remote control to turn on or turn off the back
light compensation
6.5 I would like to adjust the shooting angle of the lens
1. Press [Tilt
] or [Tilt ] on the remote control to adjust the angle
upward or downward.
2. Press [Pan
] or [Pan ] on the remote control to adjust the angle to
right or left.
3. Press [Pan - Tilt Reset] on the remote control to reset the angle to the
center point.
6.6 I would like to zoom in/out images
6.6.1 Adjust image size
1. Press [Fast +] on the remote control to zoom in images.
2. Press [Fast -] on the remote control to zoom out images.