Marantz ST-17 - Manual (Page 9)

7
ENGLISH
FRAN
Ç
AIS
BUTONNS AND OPERATION OF THE
REMOTE CONTROL UNIT
BAND
DISPLAY
MONO
MEMO
TUNING PRESET
RC-17ST
1 2 3
4 5 6
7 8 9
0
BAND
button
MONO
button Number
buttons
TUNING
UP/DOWN
buttons
MEMO
button
DISPLAY
button
PRESET
UP/DOWN
buttons
TUNING UP (
į) / DOWN (Ĭ) BUTTON
Every time the UP or DOWN side of the TUNING button is pressed, the
receiving frequency varies in the upward or downward direction, in the
steps of 50 kHz in FM band or 9 kHz in AM band.
When the button is held depressed for more than 0.5 seconds, the
receiving frequency varies continuously in the above-mentioned steps
until a station is received. Press or hold the button until the desired
frequency is displayed on the digital frequency indicator.
PRESET UP ( į) / DOWN (Ĭ) BUTTON
Every time the UP or DOWN side of the PRESET button is pressed, the
preset number will advanced one step in the upward or downward
direction. The unused preset numbers without memory contents are
skipped.
This button is also used as the CURSOR button in the station name
input mode.
PRESET MEMORY ON THE REMOTE CONTROL UNIT
This unit is equipped with the one-touch preset tuning system which is
particularly convenient when there is a large number of receivable
stations. The preset tuning system allows up to 60 stations on FM and
AM to be preset in a random order.
HOW TO PRESET A FREQUENCY IN THE MEMORY
1. Press the BAND button to select the desired band (FM/AM).
2. Press the TUNING UP/DOWN button to select the frequency of
desired station.
3. When th desired station is received, press the MEMO button.
4. The MEMORY indicator blinks for about 5 seconds. Press the
PRESET button within this time.
5. Example: To preset under preset no.15
¼ Preset tuning by recalling a preset station
Select the preset no. of the desired station in the same manner as
when presetting a station in the memory.
DELETING THE CONTENTS OF THE PRESET MEMORY
1. Select the preset station you wish to delete.
2. Press the MEMO button.
The “MEMORY” indicator will flash on the display.
3. While the “MEMORY” indicator is flashing (approx. 5 sec.), turn the
GYRO CONTROL ring to set the present number to “00”.
4. Press the MEMO button again.
The preset number and “CLEAR” indicator will flash for approx. 2
seconds on the display and the memory will be deleted.
Station names memorized for the preset station will also be deleted at
the same time.
MEMO
Press Press Press within 1.5 sec.
PRESET PRESET
1 5
Example: To preset under preset no. 3.
MEMO
Press Press Leave for 1.5 sec.
PRESET PRESET
3