Adjusting the tone, Adjusting the tone. (v p. 68) – Marantz M-CR511 User Manual
Page 68
Advertising
Adjusting the tone
1
Press DBB/TONE to select the tone parameter to be
adjusted.
2
Use ui to adjust the “Dynamic Bass Boost”, “Bass”,
“Treble”, “Balance” or “S.Direct”.
n Dynamic Bass Boost
Emphasizes the bass sound in stages according to the volume
(maximum +8 dB).
On / Off (Default: Off)
n Bass
Adjusts the bass sound.
–10dB – +10dB (Default : 0dB)
n Treble
Adjusts the treble sound.
–10dB – +10dB (Default : 0dB)
n Balance
Use op to adjust the left/right volume balance.
n S.Direct
The “Dynamic Bass Boost”, “Bass”, “Treble” and “Balance” are not
adjusted.
On / Off (Default: Off)
0 When “Speaker Response” is set to other than “Flat”, the setting is enabled
even if “S.Direct” is “On”. (v p. 79)
68
Advertising