Volume limit, Speaker response, Even if “s.direct” is “on”. (v p. 79) – Marantz M-CR511 User Manual
Page 79: Omake a setting for maximum volume
Volume Limit
o
Make a setting for maximum volume
Limits the volume to ensure safe use of this product, and also makes it
easier to adjust the volume from AirPlay or an app to an ideal range.
30 / 45 / 60(Full throttle) / Other (Default : 30)
When “Other” is selected, the volume upper limit can be set within the
range of 16 - 60. Select the value using ui and then press ENTER to
enter the setting value.
When the maximum volume is set, if you increase the volume to the setting value and
press VOLUMEd again, “Allow max volume?” is displayed. If you press VOLUME d
again the maximum volume limit is canceled.
Speaker Response
Set the output frequency characteristics.
Flat
(Default) :
Properties are flat.
Response1 :
Cuts low frequencies 40 Hz or under by –12
dB/oct.
Response2 :
Cuts low frequencies 60Hz or under by –12
dB/oct.
Response3 :
Cuts low frequencies 80 Hz or under by –12
dB/oct.
Response4 :
Cuts low frequencies 100 Hz or under by –
12 dB/oct.
0 “Speaker Response” setting values are not reflected in headphone out, Audio out
or subwoofer out.
79