Marantz SR4300N - Manual (Page 10)

7
ENGLISH
!2 PHONES jack for stereo headphones
This jack may be used to listen to the SR4300’s output through a pair
of headphones. Be certain that the headphones have a standard 1 / 4"
stereo phone plug. Note that the speakers will automatically be turned
off when the headphone jack is in use.
Notes:
• When using headphones, the surround mode will automatically
change to STEREO.
• The surround mode returns to the previous setting as soon as the
plug is removed from the jack.
!3 A/D (Analog/Digital) SELECTOR button
This is used to select between the analog and digital inputs.
Note:
• This button is not used for an input source that is not set to a
digital input in the system setup menu.
!4 HT-EQ button
Used to turn on or off HT (Home Theater)-EQ mode when the
surround mode is set as AUTO, DOLBY, DTS or STEREO.
This mode compensates for the audio portion of a movie sounding
“bright”. When this button is pressed, “EQ” indicator lights up.
!5 S- (Source) DIRECT button
When this button is pressed, the tone control circuitry is bypassed as
well as Bass Management.
Notes:
• The surround mode is automatically switched to AUTO when
the source direct function is turned on.
• S-DIRECT is turned off when the other surround mode is
selected with the SURROUND mode selector knob or the
surround mode buttons of the remote controller.
• Additionally, Speaker Configurations are fixed automatically
as follow.
(Front SPKR = Large, Center SPKR = Large, Surround SPKR =
Large, Sub woofer = On)
!6 DIMMER button
When this button is pressed once, the display is dimmed.
When this button is pressed twice, the display is turned off and “DISP”
indicator lights up.
Press this button again to turn the display ON again.
!7 MUTE button
Press this button to mute the output to the speakers and headphones.
Press it again to return to the previous volume level.
FL DISPLAY
a TEST tone indicator
This indicator blinks in generating the test tone in speaker level setup.
s DISP (Display Off) indicator
This indicator lights when the SR4300 is in the display off condition.
d TUNER’s indicators
AUTO : This indicator illuminates when the tuner’s Auto mode
is in use.
ST(Stereo) : This indicator illuminates when an FM station is being
tuned in stereo condition.
TUNED : This indicator illuminates when a station is being
received with sufficient signal strength to provide
acceptable listening quality.
f INPUT SOURCE indicators
These indicators show the current input source.
g 6.1 CHANNEL DIRECT IN indicator
This indicator lights up when the 6.1CH-IN has been selected as a
input source.
h AUTO.SURR (Auto Surround mode)
indicator.
This indicator illuminates to show that the AUTO SURROUND mode is
in use.
j DIRECT (Soruce direct) indicator
This indicator lights when the SR4300 is in the SOURCE DIRECT
mode.
k EQ mode indicator
This indicator lights when the HT-EQ function is active.
l SLEEP timer indicator
This indicator lights when the seep timer function is in use.
¡0 DIGITAL Input Indicator
This indicator lights when digital input has been selected.
¡1 ANALOG input indicator
This indicator lights when an analog input source has been selected.
¡2 SIGNAL FORMAT indicators
2 DIGITAL, EX, 2 SURROUND, dts, ES, PCM and 96kHz
When the selected input is a digital source, some of these indicators
will light to display the specific type of signal in use.
¡3 ENCODED CHANNEL STATUS
indicators
These indicators display the channels that are encoded with a digital
input signal. If the selected digital input signal is Dolby Digital 5.1ch or
DTS 5.1ch, “L”, “C”, “R”, “SL”, “SR” and “LFE” will light up.If the digital
input signal is 2 channel PCM-audio, “L” and “R” will be displayed.
If Dolby Digital 5.1ch signal with Surround EX flag or DTS-ES signal
comes in, “L”, “C”, “R”, “SL”, “S”, “SR” and “LFE” will show.
¡4 ATT (Attenuation) indicator
This indicator lights when the attenuation function is active.
¡5 NIGHT mode indicator
This indicator lights when the SR4300 is in the Night mode, which
reduces the dynamic range of digital program material at low volume
levels.
¡6 Main Information Display
This display shows messages relating to the status, surround mode,
tuner, volume level or other aspects of unit’s operation.
96kHz
DISP AUTO CD DVD VCR1 6.1CH-IN DIRECT
NIGHT ATT
AUTO SURR DSS / VCR2
CDR/ MD
TV
AUX TUNED
TUNER
TAPE
ST TEST
SLEEP ANALOG
DIGITAL EQ DIGITAL PCM
SURROUND
EX
L C
F
R
SL S SR
s d f g j l ¡1 ¡0 ¡2
¡3
k h
¡6 ¡5 ¡4
a