Marantz SR4300N - Manual (Page 12)

9
ENGLISH
⁄1 DIGITAL INPUT (Dig.1 - 4) / OUTPUT
(coaxial, optical)
These are the digital audio inputs and outputs. There are 2 digital
inputs with coaxial jacks, 2 with optical jacks.
The inputs accept digital audio signals from a compact disc, LD, DVD,
or other digital source component.
For digital output, there is 1 coaxial output and 1 optical output.
The digital outputs can be connected to MD recorders, CD recorders,
DAT decks, or other similar components.
⁄2 AC INLET
Plug the supplied power cord into this AC INLET and then into the
power outlet on the wall.
⁄3 AC OUTLET
Connect the AC power cables of components such as a DVD and CD
player to this outlet. SWITCHED outlet is provided.
The marked SWITCHED provides power only when the SR4300 is
turned on and is useful for components which you use every time you
play your system.
Cautions:
• In order to avoid potential turn-off thumps, anything plugged in
here should be powered up before the SR4300 is turned on.
• The capacity of this AC outlet is 100W. Do not connect devices
that consume electricity more than the capacity to this AC
outlet. If total power consumption of connected devices
exceeds the capacity, protection circuit shuts down the power
supply.